English
Русский
Equipment
FRAC FLEET
🔸High-pressure pump units (˃15,000 hp)
🔸Blender (up to 9 m³/min)
🔸Hydration unit (24 m³)
🔸Frac data van with remote control system
🔸Field laboratory
🔸Sand trucks and hopper (˃200 tons)
🔸Fluid storage tanks (˃300 m³)
🔸Water heating unit (3.0 MW)
🔸Double high-pressure manifold (up to 1000 atm)
🔸Automated frac control system
🔸In-house stationary laboratory with a Grace M5600 rotational rheomete
HIGH PRESSURE PUMP UNITS
🔸Country of manufacture: USA
🔸Maximum pressure: 105 MPa
🔸Flow rate of one unit: 1.4 m³/min
🔸Power unit: Cummins QSKTA-50 / Caterpillar 3512 B - 2250 hp
🔸Transmission: Allison 9820M
🔸Pumping unit: triplex Gardner Denver / SPM 2250 (4.5”)
🔸Engine heater: Arctic Fox / Webasto
🔸Control system: Siemens
🔸Fuel tank capacity: 1,500 l
🔸Chassis: semi-trailer with pneumatic suspension
BLENDER
🔸Chassis: semi-trailer
🔸Maximum flow rate 9 m3/min
🔸Engine: Detroit 60 Series, 600 hp
🔸Intake: Mission SandMaster 10x8x14
🔸Discharge: Mission SandMaster 12x10x14
🔸Mixer volume 650 l
🔸Sand feed screws: 12” (2 pcs.)
🔸Liquid additive feed: Waukesha (4 pcs.)
🔸Dry additive feed: Acrison (2 pcs.)
FRAC DATA VAN WITH FIELD LAB
🔸Control of pump units. Collection of complete information on frac execution in real time
🔸SMART software, Siemens, Fracpro
🔸Ability to control the blender
🔸Presence of a field laboratory
🔸Laboratory blender (WARING)
🔸Fann 35 viscometer
🔸Julabo water bath
🔸Set of sieves for proppant testing
🔸Electronic laboratory scales
🔸Fann viscometer
🔸Portable pH meter SevenGo
🔸HACH water testing kits
HYDRATION UNIT
🔸Chassis: semi-trailer
🔸Engine: Cummins QSX-15, 540 hp
🔸Tank capacity: 24 m³
🔸Circulation system flow rate: 16 m³/min
🔸Operating mode of the unit: manual and automatic
🔸Electronics and control system: Siemens
SAND TRUCKS AND HOPPER
🔸Chassis: Mercedes-Benz Actros 8x4
🔸Capacity of each: 42 tons of propane
🔸Ability to pump more than 100 tons of propane in one operation
🔸Two working compartments with a crosswise division of the bunker
🔸Hydraulic slide
🔸Bunker lift angle up to 40°
FLUID STORAGE TANKS
🔸Mobile steel tanks for quick installation and connection to the GRP system
🔸Chassis: trailer
🔸Volume of each: 62 m³
🔸Ensuring continuous liquid supply to pump units
🔸High strength and tightness
🔸Resistance to aggressive chemical environments
🔸Ability to operate in various climatic conditions
WELLHEAD AND DOWNHOLE EQUIPMENT FOR FRACTURING
🔸Hydromechanical packers for use in all sizes of production strings
🔸Mechanical lower packers for selective treatments during various technological operations
🔸Hydraulic anchors to prevent the packer from moving upward when creating a pressure differential below the packer
🔸Frac equipment with working pressures of 70 MPa and 105 MPa – 20 units
🔸Coiled tubing 88.9 mm; threads NUE, EUE, TMK, VAM TOP; steel grades R110, N80 – over 45,000 m
Have questions?
